Welder For Sale Craigslist (2024)

FAQs

Is it OK to buy a used welder? ›

A used welder doesn't mean that the machine isn't any good or is of low quality, it just means that the machine has been used for a while and was probably traded in by the original user for a newer model. There are many expert sellers, like Vern Lewis Welding Supply, who offer quality, used welders for great deals.

TITANIUM Easy-Flux 125 Amp Welder

But any beginner will find a lot to like in the TITANIUM™ Easy-Flux 125 Amp Welder. As a lightweight (a little over 15 lbs.) flux-core machine, it's great for general welding work on metals up to 3/16 inch thick in your home shop or out in the yard.

MIG Welders (GMAW or Gas Metal Arc Welding)

MIG (metal inert gas) welding is an excellent choice for beginning welders. This easy-to-handle machine is usually spool-fed to create professional-looking joints on both thick and thin metals.

Power Requirements for DIY Welding

DIY home welding jobs usually don't require much welding power. Most welders support at least 160A output, which is more than enough to weld most fences, garden furniture, grills, auto body parts, DIY projects, metal art, and similar hobby welding tasks.

A basic setup for a beginner welder can cost as little as $500, while a professional-grade setup can cost upwards of $10,000.

Statistical Analysis of Welder Retirement Age

At Red River LLC, we recognize that the average retirement age for welders typically falls between 55 and 65 years. This range is crucial for our strategic workforce planning.

Tungsten Inert Gas (TIG) welding is widely considered the most challenging welding process to learn. The sheer complexity of the technique requires more practice and focus to master than other less-technical welding methods. TIG welding also results in some of the strongest and sturdiest welds in the industry.

Some argue that stick welding is stronger than MIG welding, since it offers better penetration for thicker materials. However, MIG welding can provide good welds despite not being as effective on thicker metals, and is better for joining thinner metals with a good finish and less risk of burn-through.

MIG welding is the most beginner-friendly type of welding. It is a faster process that is easy to learn and forgiving of mistakes. TIG welding is a slower process that requires more time to master and produces more precise welds on a variety of materials types.

Lower voltage welders are designed to work in a home outlet, while the higher voltage models need higher capacity plugs such as the kind used for electric driers.

What does MIG stand for in welding? ›

Metal Inert Gas (MIG) welding is an arc welding process that uses a continuous solid wire electrode heated and fed into the weld pool from a welding gun.

Unlike MIG or TIG, stick welding doesn't need an external gas. Instead, the outer flux coating on each electrode works to shield the weld as it melts. The flux coating melts with the metal, releasing gases from within which bubble to the surface.

Some welders work in factories, construction sites, or shipyards, while others may work in smaller shops or repair facilities. Welders may work in tight spaces, at heights, or in uncomfortable positions. Safety concerns: Welders must follow strict safety protocols to protect themselves and others from injury.

A good weld should be visually appealing, with a smooth and uniform weld bead that shows proper fusion and penetration. Bad welds, on the other hand, may contain defects like porosity, pinholes, or slag on the weld surface, which can compromise the strength and reliability of the weld.

Take it to the pawn shop. Apparently, the pawn shop is the first place to go if you are looking to get rid of an older welder with life left in it. Don't expect to receive much more than the equivalent scrap weight for it though, and if you ever decide to buy it back, it will likely cost you more than if it was new.